|
High Gloss Finish for Turnings
|
I am looking for a high gloss, inexpensive, fast-drying finish to use on my wood turnings.
Michael Dresdner: Inexpensive is in the eye of the beholder, but the quickest and easiest high gloss finish for lathe work is French polish. That term refers to both a technique of applying shellac using a cloth pad and a type of finish. Probably the easiest way to get there is with
Behlen's Woodturner's Finish, a French polish formulated specifically for lathe work. Don't be too concerned about the price; you will find a little goes a very long way. Another good French polish option is to use
Zinsser SealCoat right out of the container, which is probably the cheapest way, though it does take a bit more skill. Straight dewaxed shellac, which is what SealCoat is, can grab or curdle in less experienced hands. To prevent that, mix about one part mineral spirits or turpentine to five parts SealCoat to make a more user-friendly French polish. Put it in a plastic squeeze bottle and shake it every time before loading some onto a pad, since it will separate almost immediately.
This article originally appeared in the Woodworker's Journal eZine.
Click here for information on this free, twice monthly online publication.
Copyright; 2010 Woodworker's Journal
All rights reserved. No part of this article may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval devices or systems, without prior written permission from the publisher.
|