|
Guide Block Circle Cutter
|
This jig attaches directly to your band saw's guide block assembly, unlike other circle-cutting jigs that clamp to the saw table. To install it, remove the guide block locking screws and replace them with 5/16" 18 tpi threaded rod (or bolts with the heads cut off). I slotted the ends, as shown, in order to leave these screws in the saw for adjusting the guide blocks with a screwdriver.
- Tom Flader, Fond du Lac, Wisconsin
This article originally appeared in the Woodworker's Journal eZine.
Click here for information on this free, twice monthly online publication.
Copyright; 2010 Woodworker's Journal
All rights reserved. No part of this article may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval devices or systems, without prior written permission from the publisher.
|