This fence is nothing more than a big T-square made from hardwood scrap. It needs no rails because it slides against two panhead machine screws in the cast-iron table. I added locknuts to mine so the fence can be adjusted for blade drift by screwing the bolts in or out. I found the fence so useful that I added a taller fence for resawing. If your band saw table does not have threaded holes as shown, drill and tap them.
- Lonnie Cook; Orlando, Florida
This article originally appeared in the Woodworker's Journal eZine.
Click here for information on this free, twice monthly online publication.
Copyright; 2010 Woodworker's Journal
All rights reserved. No part of this article may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval devices or systems, without prior written permission from the publisher.
|